Printable Tire Depth Gauge

Printable Tire Depth Gauge – A tire depth chart is usually a simple table that lists the depth of the tire tread and the associated condition of the tire. Use this simple penny test to check the tire tread depth of each tire so you know when to replace your tires. There are two ways to check tire tread depth—by using a gauge or a penny to measure the tread depth. New tires typically come with 10/32” or 11/32” tread depths, and some.

You can measure tire wear level easily with a tire depth gauge. If that is not readily available, a quick and easy trick is to use a lincoln penny. I’ll focus on imperial, so inches and specifically in 32nds of an inch, while countries using. These inexpensive tools are inserted into the deepest tread groove and measure.

Printable Tire Depth Gauge

The best and most accurate way to measure tread depth is with a tire tread depth gauge. If you live where it is wet you are good until your tires are at 4/32 or 3mm. This is a tire tread depth gauge you can use to test your tires to see if they need replacement.

Measuring tread depth with a gauge. Here is a simple example: Also includes tips & easy printable pdf.

To measure tire tread depth, insert the bottom edge of the card into tire tread. Find the shallowest groove of the tread and insert the pin of the gauge until the base is flush with the tire; If your vehicle’s tire tread meets normal conditions, the blue indicator will not be visible.

5/32” — if wet roads. The penny test in the united states, tire tread depth is measured in 32nds of an inch. How to measure your tire tread depth with a gauge.

Tire Tread Depth Chart amulette